Home>Products>Pipe End
Facing
Machine:
General
Specification:
The Machine is used for the purpose of Chamfering and Deburring of the
Pipe before Galvanizing and Threading Operation. Pipe is chamfered from
the Outer, Inner and Front face by Three different tools. The Pipe
remains Stationery and the Facing Head rotates. Slide Travels towards
Facing Head for Chamfering manually. The Machine mainly consists of the
following: -
Base
Head Stock
Saddle
Clamping Vice
| Model No. |
NCT-25 |
| Max. Pitch Can be Rolled
(in mm) |
2.5 |
| Max. Dia can be
Rolled in feed (in mm) |
25 |
| Max. Dia can be
Through feed (in mm) |
16 |
| Max. Rolling
Length in feed (in mm) |
80
|
| Max. Rolling
Length Through feed |
Indefinite |
| Max. Outer Dia
Thread Rolls (in mm) |
150
|
| Spindle Dia
(Bore Dia) (in mm) |
54 |
| Max. Rolling
Force |
8 Tons
|
| Power for Roll
Spindles |
3 H.P. 1440 RPM
|
| Power for
Hydraulic Pump |
2 H.P.
|
| Power for
coolant pump |
½ H.P.
|
| Model No. |
NCT-B- 6" to 16" |
| Capacity of the machine
for Beveling Min. |
6" N.B. Pipe
|
| Capacity of the
machine for Beveling Max. |
16" N.B. Pipe
|
| Outer Dia of
the Sleeve |
300 mm
|
| Main Spindle
Bearings (Taper Roller) |
32228 &
32226
|
| Number of
Spindle Speeds |
Four Nos.
|
| Cutting Tools Required
(HSS 10% Cobalt) |
1" (Carbide
Tool)
|
| Main Motor |
30 H.P., 960 RPM
|
| Max. Travel of the Sleeve |
90 mm
|
| Approx. Wt. Of the
machine. |
8000 Kgs.
|
| Model No. |
NCT-E-1.1/2" |
| Min. Dia of Pipe to be
Chamfered |
1/2”
N.B. Pipe |
| Max. Dia of
Pipe to be Chamfered |
1.1/2” |
| Cutting Tools
Required (HSS 10% Cobalt) |
3/8” |
| Number of
Spindle Speeds |
Two Nos.
|
| Range of
Spindle Speeds |
37 to 64 RPM |
| Main Motor |
3 H.P., 1440 RPM
|
| Approx. Wt. of
the Machine |
750 Kgs. |
| Model No. |
NCT-E-4" |
| Min. Dia of Pipe to be
Chamfered |
1/2”
N.B. Pipe |
| Max. Dia of
Pipe to be Chamfered |
4” |
| Cutting Tools
Required (HSS 10% Cobalt) |
3/8” |
| Number of
Spindle Speeds |
Four Nos.
|
| Range of
Spindle Speeds |
68 to 180 RPM |
| Main Motor |
3 H.P., 1440 RPM
|
| Approx. Wt. of
the Machine |
1100 Kgs. |
| Model NCT-6" |
2.1/2" to 6" (Pillar
Type) |
| Saddle Movement |
10"-12" |
| Spindle Speed
Range |
25-50 |
| Number of
Spindle Speed |
2 |
| Threading
Capacity |
2.1/2" to 6" |
| Production per
Hour |
20-25 |
| H.P. Required |
15 H.P. 960 RPM |
| Lead Screw |
Provided |
| Weight (KG) |
1900 |
| Model NCT-8" |
4" to 8" (Pillar
Type) |
| Saddle Movement |
10"-12" |
| Spindle Speed
Range |
25-50 |
| Number of
Spindle Speed |
2 |
| Threading
Capacity |
4" to 8" |
| Production per
Hour |
15-20 |
| H.P. Required |
20 H.P. 960 RPM |
| Lead Screw |
Provided |
| Weight (KG) |
2500 |
