Products:
Industrial Machinery:Industrial Tools
National
Cutting Tools
Industrial Tools
Home>Products>Hydraulic Thread Rolling Machine 2Roll:
|
Hydraulic Thread
Rolling Machine 2Roll Type(Video 1)
|
Hydraulic Thread
Rolling Machine 2Roll Type(Video 2)
|
General Specification:
National Cutting Tools are involved in manufacturing and providing Thread Rolling Machine used for generating nails, screws and tools. Thread rolling is a cold-forming function only for exterior nails discussions in an empty. The empty is pushed by line rolling passes away which are connected to the line rolling device. The discussions were established by the pushing improvement.
The discussions created by the device provide fine surface, great manufacturing rate, greater precision.
| Model No. | NCT-25 |
| Max. Pitch Can be Rolled (in mm) | 2.5 |
| Max. Dia can be Rolled in feed (in mm) | 25 |
| Max. Dia can be Through feed (in mm) | 16 |
| Max. Rolling Length in feed (in mm) | 80 |
| Max. Rolling Length Through feed | Indefinite |
| Max. Outer Dia Thread Rolls (in mm) | 150 |
| Spindle Dia (Bore Dia) (in mm) | 54 |
| Max. Rolling Force | 8 Tons |
| Power for Roll Spindles | 3 H.P. 1440 RPM |
| Power for Hydraulic Pump | 2 H.P. |
| Power for coolant pump | 0.1 H.P. |
| Model No. | NCT-40 |
| Max. Pitch Can be Rolled (in mm) | 3.5 |
| Max. Dia can be Rolled in feed (in mm) | 40 |
| Max. Dia can be Through feed (in mm) | 28 |
| Max. Rolling Length in feed (in mm) | 150 |
| Max. Rolling Length Through feed | Indefinite |
| Max. Outer Dia Thread Rolls (in mm) | 180 |
| Spindle Dia (Bore Dia) (in mm) | 54 |
| Max. Rolling Force | 13 Tons |
| Power for Roll Spindles | 5 H.P. 1440 RPM |
| Power for Hydraulic Pump | 3 H.P. |
| Power for coolant pump | 0.1 H.P. |
| Model No. | NCT-50 |
| Max. Pitch Can be Rolled (in mm) | 4.0 |
| Max. Dia can be Rolled in feed (in mm) | 50 |
| Max. Dia can be Through feed (in mm) | 35 |
| Max. Rolling Length in feed (in mm) | 150 |
| Max. Rolling Length Through feed | Indefinite |
| Max. Outer Dia Thread Rolls (in mm) | 200 |
| Spindle Dia (Bore Dia) (in mm) | 69.85 |
| Max. Rolling Force | 15 Tons |
| Power for Roll Spindles | 7.5 H.P. 1440 RPM |
| Power for Hydraulic Pump | 5 H.P. |
| Power for coolant pump | 0.1 H.P. |
| Model No. | NCT-80 |
| Max. Pitch Can be Rolled (in mm) | 5.0 |
| Max. Dia can be Rolled in feed (in mm) | 80 |
| Max. Dia can be Through feed (in mm) | 40 |
| Max. Rolling Length in feed (in mm) | 150 |
| Max. Rolling Length Through feed | Indefinite |
| Max. Outer Dia Thread Rolls (in mm) | 220 |
| Spindle Dia (Bore Dia) (in mm) | 69.85 |
| Max. Rolling Force | 24 Tons |
| Power for Roll Spindles | 10 H.P. 1440 RPM |
| Power for Hydraulic Pump | 5 H.P. |
| Power for coolant pump | 0.1 H.P. |
| Model No. | NCT-100 |
| Max. Pitch Can be Rolled (in mm) | 5.5 |
| Max. Dia can be Rolled in feed (in mm) | 100 |
| Max. Dia can be Through feed (in mm) | 50 |
| Max. Rolling Length in feed (in mm) | 150 |
| Max. Rolling Length Through feed | Indefinite |
| Max. Outer Dia Thread Rolls (in mm) | 220 |
| Spindle Dia (Bore Dia) (in mm) | 69.85 |
| Max. Rolling Force | 30 Tons |
| Power for Roll Spindles | 12.5 H.P. 1440 RPM |
| Power for Hydraulic Pump | 5 H.P. |
| Power for coolant pump | 0.1 H.P. |
| Model No. | NCT-120 |
| Max. Pitch Can be Rolled (in mm) | 8 |
| Max. Dia can be Rolled in feed (in mm) | 125 |
| Max. Dia can be Through feed (in mm) | 70 |
| Max. Rolling Length in feed (in mm) | 150 |
| Max. Rolling Length Through feed | Indefinite |
| Max. Outer Dia Thread Rolls (in mm) | 220 |
| Spindle Dia (Bore Dia) (in mm) | 69.85 |
| Max. Rolling Force | 40 Tons |
| Power for Roll Spindles | 15 H.P. 1440 RPM |
| Power for Hydraulic Pump | 7.5 H.P. |
| Power for coolant pump | 0.1 H.P. |
Circular Thread Rolls
These line comes are used on line rolling device. These comes in set of two and three pieces produced from D2, D3 and M2 Material to suit any kind of device. For any requirements of line such as ISO Measurement Din Whiteworhth America, Trapozodical, Acme etc. Read More